
Manitex 50128S · 50-Ton Boom Truck
With a 128-foot main boom, this crane provides additional capability for lifts where the setup, height or distance requirements exceed what the 30-ton can handle. It is the largest machine we run.

You have a load that needs more height, distance or lifting capability than the smaller crane can provide. When the crane decision is the last piece before the lift can move forward, choosing the right machine matters.
At MacDonald Crane, the Manitex 50128S is used when the 30-ton does not fit the lift requirements. Like every crane we operate, it comes with an operator. It is built for commercial equipment lifts where the job requires more capacity, boom capability or setup distance.
One important part of planning a 50-ton lift is confirming there is enough room for the crane setup. The 50-ton requires more space for its outriggers and careful planning around the boom path before the lift begins.
If you are unsure about the setup area, send us the address and approach details. We can review the conditions before determining whether this crane is the right fit.

The bigger crane is not automatically the right choice. The minimum on this machine is six hours, against four on the 30-ton, so choosing the larger crane when it is not required can increase the scope of the booking. Three details help determine which machine fits the lift.
Call (508) 238-1055
The 50-ton is the bigger of the two. It is not the default.

With a 128-foot main boom, this crane provides additional capability for lifts where the setup, height or distance requirements exceed what the 30-ton can handle. It is the largest machine we run.

If the lift fits within the 30-ton's capabilities, that is the machine to book. Ask before assuming the job has outgrown the smaller crane.

The load weight. Include the actual lifted weight, including rigging and anything attached to the load.
The height it has to clear. The highest point the load must pass over matters more than the roof height alone.
The distance from setup. The distance from where the outriggers are placed to where the load finishes helps determine whether the 30-ton fits or the 50-ton is the better option.
With those three details, we can assess which machine best fits the lift.
Three details help determine whether the 50-ton fits your lift. If the 30-ton can handle the job, we will tell you that before the lift is scheduled.
Send a photo showing the approach from the setup area to where the load needs to land.
We review the load details and confirm the equipment requirements for the job. Then we review where the crane can set up and what access the site requires.
If requested, we can prepare a 3D lift plan showing the setup, swing path and what the load needs to clear.
The crane arrives, the operator positions it for the lift and the outriggers are set on pads based on the lift requirements.
The operator completes the lift, places the load in its final position and prepares the crane for teardown once the work is complete.
We do not pull permits or schedule police details. Those responsibilities sit with whoever is running the job, so confirm any required arrangements before the lift date.

If the lift fits the 30-ton, we will tell you before you book the larger machine. Choosing the right crane matters more than choosing the largest one.
If the lift requirements point to a different machine, both the 30-ton and 50-ton are operated by the same team from the same Easton yard.
A tonnage rating without the lift details can be misleading. We look at the load weight, height and distance before recommending the right crane.
The 50-ton operates throughout the same service area as the rest of our fleet, including Southeastern Massachusetts, Boston, Cape Cod, Rhode Island and Southern New Hampshire.
The 50-ton has a six-hour minimum booking. Beyond that, the time involved depends on the lift requirements, including the setup, number of picks and whether the crane needs to reposition during the work.
The job location, access conditions and preparation before the crane arrives can also affect the overall time required.
Multiple lifts from the same setup can be more efficient than repositioning the crane between separate picks.
Hourly rates, minimums and what the clock covers
Based in Easton, the Manitex 50128S serves commercial contractors throughout Southeastern Massachusetts and surrounding areas.
Our largest crane is a 50-ton boom truck. If your lift requires equipment outside our fleet, we will let you know before scheduling.
We do not publish one reach number because the lift depends on the load, height and setup distance.
The 50-ton requires more setup space than the 30-ton. The exact requirements depend on the lift and outrigger placement.
Yes. Multiple picks can often be completed from one setup. Tell us about all planned lifts so we can position the crane appropriately.
We assess the lift requirements before the scheduled date. That is why we ask for the weight, height and distance before booking.
As the CFO of Climate Design Systems & Merrimack Valley Corporation, MacDonald Crane has been a very reliable partner to us and has always come through. Their prices are very competative to other local crane companies and they deliver! I highly recommend.
Keith BentleyGoogle reviewRead on Google 10 years ago they delivered and placed four rooftop units to my job site. They were punctual, professional and the driver was a hot ticket. Will definitely use them again.
Gary VitaglianoGoogle reviewRead on Google Very reliable & safety is their #1 concern
Cheryl O'DonnellGoogle reviewRead on Google I have a hot tub business and use MacDonald exclusively for crane service. Best around!
Roger MayerGoogle reviewRead on Google
Send the load weight, the height it must clear and the distance from the crane setup point to the final position. If you are unsure, send an address and photo of the setup area, and we can assess which crane best fits the lift.