4.8 Google reviewsoffice@macdonaldcrane.comMost weeks book up. Call two or three days ahead.

Machinery Rigging for Commercial Lifts Across Southeastern Massachusetts, Boston, Cape Cod, Rhode Island & Southern New Hampshire

  • Rigged by the crew running the lift
  • NCCER-certified operator on every job
  • Slings and hardware sized per load

Request a Lift Quote

Rigging the Loads We Lift

When a load is not balanced correctly, the lift can slow down while the right rigging approach is worked out. Uneven weight distribution, limited lifting points or unusual equipment shapes all require careful planning before the load moves.

At MacDonald Crane, we rig the loads we lift, helping determine the right pick points and hardware before the scheduled lift. We handle rigging for rooftop units, generators, structural steel, compressors and machinery going onto pads.

What we need to understand early is how the load balances and what points are available for lifting. The right rigging approach depends on the equipment, its weight distribution and the way it needs to be moved.

If you are unsure, send us a photograph of the piece with any lifting points visible, and we can review the rigging requirements before the date is booked.

Two packaged rooftop units on the ground beside a commercial building, slings hanging from a MacDonald Crane hook above them

How Do You Choose the Rigging for an Awkward Load?

The Rigging and Crane Are Planned Together

The rigging required depends on the load being lifted, the available pick points and the conditions around the lift. The hardware needed for the job is selected based on the equipment and how it needs to move.

Call (508) 238-1055

Consider These Four Factors

A packaged rooftop unit hanging level on four slings beside a commercial building, photographed from above

What it weighs. Include the load weight, rigging and any attachments that will be lifted together.

Where it balances. Understanding the balance point helps determine the right rigging approach and keeps the load controlled during the lift.

What it can be picked up by. Lifting points, frames, base rails and other attachment areas determine what hardware can be used.

How much room it has on the way. The available path affects how the load can be controlled, especially in tighter spaces.

Send the Weight and a Photo, and We Will Review the Rigging

Send the load weight, where it gets picked up and what is in the way. Add a photo of the equipment with any visible lifting points, and we can review the rigging requirements before the lift.

  • Load weight

  • Where it gets picked up

  • What is in the way

Not sure yet?

Send a photo of the equipment and lifting points, or call (508) 238-1055.

Request a Lift Quote

Rigging Backed by the Crew Performing the Lift

2009Operating from Easton since the first MacDonald crane went to work.
9 in 10 jobsBooked by contractors who have worked with us before.
1 business dayCertificate of insurance turnaround from your request.
NCCEREvery operator we send holds NCCER certification through an OSHA-accredited program.

What Happens on the Day of a Rigged Lift?

  1. Before the date.

    You send the load weight, pickup details and a photograph of the equipment. We review the rigging requirements, hardware needed and crane setup for the lift.

  2. Setting up.

    The crane arrives, the operator positions it for the lift and the outriggers are set on pads. Rigging begins once the crane is properly positioned.

  3. Rigging the load.

    The team selects the appropriate lifting points and hardware for the equipment. Tag lines and additional rigging are used when needed to help control the load during the lift.

  4. The pick itself.

    The operator completes the lift in a controlled manner, places the load in position and removes the rigging once the work is complete.

What to Have Ready Before the Rigged Lift

We Bring

  • Slings, shackles and any additional rigging required for the load
  • Outrigger pads to support the crane during setup
  • The crane and NCCER-certified operator who runs it
  • Certificate of insurance provided within one business day of request

You Arrange

  • Firm, level ground for crane setup, kept clear
  • Clear access to the setup area, including gates opened and vehicles moved
  • Any site personnel needed to prepare for or receive the load
  • Any required permits or police details

We do not pull permits or schedule police details. Those responsibilities sit with whoever is running the job, so confirm any required arrangements before the lift date.

A MacDonald Crane boom truck with its boom raised beside a multi-storey commercial building

4 Reasons Contractors Have Us Rig It

One Crew Handles the Lift

The same team that rigs the load performs the lift, keeping communication with one crew from planning through placement.

Hardware Matches the Load

Sling type, shackle rating and additional rigging depend on the equipment, its balance and available lifting points. We review those details before the lift.

Complex Loads Are Part of the Work

Uneven weight distribution, limited lifting points and unusual equipment shapes require careful planning before the rigging is selected.

3D Planning When Needed

If the lift requires additional planning, we can build a 3D model showing the setup and load path before the scheduled date.

What Drives the Cost of a Rigged Lift?

The cost of a rigged lift depends largely on the time required to prepare, rig and complete the lift. Equipment with clear lifting points is typically easier to prepare than loads requiring additional rigging considerations, such as balance checks, spreaders or tag lines.

Site readiness also affects how efficiently the lift can be completed. Having the equipment accessible and ready before the crane arrives helps keep the work moving.

A load on slings lifted over power lines by a MacDonald Crane boom truck Hourly rates, minimums and how the clock runs »

Where You Can Find Our Cranes

Based in Easton, MacDonald Crane serves commercial contractors throughout Southeastern Massachusetts and surrounding areas.

Service areas:

See our full service area »
  • Norfolk County
  • Braintree
  • Canton
  • Dedham
  • Foxborough
  • Quincy
  • Sharon
  • Stoughton
  • Walpole
  • Suffolk County
  • Boston
  • Chelsea
  • Revere
  • Winthrop
  • Worcester County
  • Auburn
  • Milford
  • Northborough
  • Shrewsbury
  • Westborough
  • Worcester

FAQs

Do you rig the load or do we?

We rig the loads we lift using the slings and hardware required for the job. Let us know the equipment details before the lift.

What if the load has no lifting points?

Some equipment does not have obvious lifting points. Send a photograph and we can review the best approach before the lift.

Can you lift an off-center load?

Yes. Understanding where the load balances helps determine the right rigging approach before the lift.

Do you supply spreader bars?

Yes, when the load requires one. Spreader bars can help support certain equipment during lifting.

Is rigging included in the booking?

Rigging requirements vary by lift. Contact us with the equipment details and we will explain what your job requires.

Google Reviews

What Our Customers Say

4.8 Google reviews
  • Google review

    As the CFO of Climate Design Systems & Merrimack Valley Corporation, MacDonald Crane has been a very reliable partner to us and has always come through. Their prices are very competative to other local crane companies and they deliver! I highly recommend.

    Keith Bentley, Google reviewerKeith BentleyGoogle reviewRead on Google
  • Google review

    10 years ago they delivered and placed four rooftop units to my job site. They were punctual, professional and the driver was a hot ticket. Will definitely use them again.

    Gary Vitagliano, Google reviewerGary VitaglianoGoogle reviewRead on Google
  • Google review

    Very reliable & safety is their #1 concern

    Cheryl O'Donnell, Google reviewerCheryl O'DonnellGoogle reviewRead on Google
  • Google review

    I have a hot tub business and use MacDonald exclusively for crane service. Best around!

    Roger Mayer, Google reviewerRoger MayerGoogle reviewRead on Google

Plan the Rigging Before the Pick

Proper rigging planning helps keep the lift controlled and prepared before the equipment arrives on site. Send us the load weight and a photograph of the piece, and we can review the rigging requirements before the scheduled lift.

Call (508) 238-1055